With pinball making a huge revival throughout the country, Mild Giant desires to ensure that these timeless, beautiful devices remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.
At first glimpse, pinball makers can appear daunting to move due to the fact that of their size, fragility, and weight. Luckily, our knowledgeable Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
The majority of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.
Later devices have hinges and utilize a latching system to keep the headbox upright. There may likewise be 2 bolts inside as added safety, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball devices, you require to get rid of the headbox rear access panel to get to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the key may have been lost. On a regular basis, there is a screw keeping this panel in place.
When within, remove the bolts and unplug the big adapters that have wiring going down into the device. You might wish to label these ports to put them back in the ideal spot, but they must be various sizes, making it difficult to plug back incorrectly.
You can now get rid of the headbox entirely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs
For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.
Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.
Then, open up the back box light panel by raising the lock located on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.
Now that you are inside, you can remove the bolts, and any plugs that have wires going down into the device. You might wish to label these plugs to put them back in the right spot. You might not have to get rid of the plugs, as the wiring ought to be long enough to enable the headbox to be folded down.
At this moment, you can secure the lamp panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the supplied key, turn the latch 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the maker. This is a basic setup and requires no tools.
If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, then pulling it out from the bottom.
Next, you will need to eliminate the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Get rid of the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.
Pinball Machine legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.
But these captive nuts and threaded plates can be damaged, and using extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.
With the front door (coin door) open, move the lock down bar news lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.
You need to now have access to any nuts that might have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.
Be sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.
You are now ready to transport your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.
If you are moving the pinball using a van or SUV, it may be this page easier to remove the legs simply prior to filling the maker. Get a pal to assist and have among you supporting the pinball, while the other eliminates the front legs. Move the device in, and after that eliminate the back legs. It is much my company easier to load the maker front.
Make sure you strap the pinball in, as you do not want it moving if you need to stop unexpectedly!
For Electro-Mechanical pinball makers, you require to eliminate the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball utilizing a van or SUV, it might be much easier to eliminate the legs simply prior to packing the device. Grab a friend to help and have one of you supporting the pinball, while the other gets rid of the front legs.